Foodprocessing - Formit Combi-1000

The FORMIT Combi-peelers are based on a patented method developed by FORMIT Foodprocessing.

The combi-peeler can be used for peeling of both small and large sized products. The peeler works with round and oval shaped products.

Feeding the peeler with a clean (washed or brushed) raw material, the peeler produces a knife-like cut surface on the end product

Further info about the Combi-peeler principle >>

All Combi-peelers can be operated without adding water in the peeling process. Water is used for cleaning and washing purposes only.

By changing the peeling element types the Combi-peeler can be adapted for variuos purposes.

Peeled product samples >>

Peeling element alternatives>>

The feeding of raw material to a peeler is important for the quality and yield. With good raw material feeding, you can ensure that your peeling project will be successful.

Building a good raw material feeder >>

By arranging good transportation for the peeling waste, it is easier to keep the production environment clean.

Arranging waste transport from the Combi-1000>>

TECHNICAL DATA Size with standard frame
Overall length	2990mm	(118")
Overall width	1100mm	(43")
Overall height	2206mm	(87")
Frame length	2280mm	(90")
In-feed chute width	500mm	(20")
In-feed height	1642mm	(65")
Discharge height	1254mm	(49")
Overall weight	1250 kg	(2750 lbs)
Supply voltage
220-415 v 3 phases 50-60hz
Motors
Rollers	4 x 1.5 kW	(4 x 2HP)
Auger	1 x 0.37 kW	(1 x 0.5HP)
Rollers
Number of rollers	10 or 5
Roller diameter	88 mm	(3,5 ")
Roller length	2000 mm	(79 ")
Abrasive	760 mm	(30 ")
Knife	1240 mm	(49")
Auger
Diameter	800 mm	(31.5")
Pitch	430 mm	(17")
Capacity
600-1100kg/h depending on raw material type and quality. The max. capacity indicated for good quality, size graded potatoes.

NOTE: Due to continual improvements, the accuracy of the description and illustration cannot be completely guaranteed.

Formit Combi 1000

Advantages of the Combi-1000-CK peelers are:

1. From raw material to a Knife peeled product in one machine.

2. A natural shaped end product and thereby superior yield compared to other knife peeled products. (No flat peeling).

3. A large variety of products can be peeled in the peeler without mechanical adjustments to the peeler.

4. Can be equipped with plc panel programmed for different raw materials (easy to use Right pre-settings gives good end product and little waist at startup).

5. Gentle and adjustable tumbling of raw material especially important with sensible products.

6. Can be operated with or without water.

7. Semi dry waist pulp that can be pumped.

8. Good access for cleaning and maintenance.

9. Long shelf life on rollers both carborundum and knife.(longer shelve life than a conventional carborundum peeler due to high roller speeds)
(Recommended carborundum regretting interval on potatoes 1,2M kilos and recommended re-sharpening on first two knife elements 3,6M kilos on potatoes).

10. Low maintenance costs due to long service intervals.

11. Trade in of your secondhand rollers.

12. Continuous self cleaning of the roller due to hi rotation speed.

13. Low energy consumption. (only one peeler with comparably small motors)

Photo below, COMBI-1000 integrated in a production line.
(Just click on the photo to enlarge):